Below is an overview of the types of stainless steel pressure vessels and their primary functions.

date 2022-06-12

Author:

Below is an introduction to the types of stainless steel pressure tanks and their primary functions. A pressure tank needs to be installed between the water pump and the piping network. When the water level in the pipeline drops, the water level in the tank rises, compressing the air inside and increasing the pressure, thereby ensuring a continuous water supply.

　Next, we will introduce… Stainless steel pressure tank Types and main functions

　　Currently, small pressure tanks on the market come in two types: bladder‑type and diaphragm‑type. In bladder‑type pressure tanks, the air is in direct contact with the water source; over time, the air can leak out and dissolve into the water, necessitating periodic air replenishment to ensure the tank’s proper operation. For such tanks, it is common to charge them with an inert gas, such as nitrogen. As for diaphragm‑type pressure tanks, a pressure tank should be installed between the pump and the distribution network. When the water level in the network drops, the water level in the tank rises, compressing the air inside and increasing the pressure, thereby enabling water delivery.

　　During the subsequent continuous water‑use phase, air from the tank enters the distribution network, causing the water level to drop and the pressure inside the tank to decrease. When the pressure falls to its lower limit, the electric pressure switch activates, restarting the motor and pump. Under normal operating conditions, the pump can automatically adjust its on/off cycles based on water consumption, thereby ensuring that there remains a sufficient water level within the pump.

　　 Stainless steel pressure tank What is its main function?

　　 Stainless steel pressure tank It is commonly used for circulating liquids and gases, offering a variety of functions. For instance, it can achieve excellent transfer performance, making it particularly suitable when transporting certain liquids or gases that require intermediate storage or handling. In such cases, this tank can be employed to enhance efficiency throughout the transportation process.

　　Another reason is its pressurization capability: many liquids and gases today are transported under pressure, and boosting their propulsion often leads to higher transportation costs. However, using this pressure vessel yields a different outcome, resulting in greater energy efficiency.

　　With Stainless steel pressure tank Its functionality also provides a certain buffering effect, ensuring that the pipeline meets subsequent requirements during transport while offering effective protection and extending the service life of the transport equipment. Currently, some shipments are carried out in a direct‑transport format, which fails to safeguard pipelines or other equipment; however, employing such specialized equipment yields markedly different results.

　　Some Tips for Choosing a Stainless Steel Pressure Tank

　　1. Design pressure and material selection must be considered.

　　The design pressure of the stainless steel pressure vessel meets the required specifications; next come material selection and wall thickness. Compressor discharge pressures typically range from 7, 8, 10, to 13 kgf/cm², with 7 and 8 kgf/cm² being the most commonly used. Therefore, the tank capacity is generally chosen as one-seventh of the compressor’s air delivery rate.

　　2. Examine the appearance

　　The appearance of stainless steel pressure vessels reflects the product’s grade and value. Only reputable manufacturers with robust equipment and a reliable quality‑assurance system can ensure that their products maintain a high‑quality aesthetic.

　　3. Check the product nameplate.

　　The nameplate shall indicate the manufacturer’s and the inspection agency’s names, as well as the date of manufacture, and bear the inspection agency’s seal in the upper‑right corner. In addition, the nameplate must specify the product number, weight, volume, design pressure, working pressure, and the hydrostatic test pressure, and identify the medium contained in the gas storage tank. The product’s steel stamp number must be positioned directly beneath the nameplate on the tank body, and it must match the number shown on the nameplate; if these two numbers do not correspond, the product shall be deemed non‑conforming.

　　Well, that’s all for now—no need to go into further detail. Thanks for watching, and see you next time!

Previous item

Let me explain how to lower the temperature of a stainless steel pressure vessel.

Next item

Below is a brief overview of the four steps involved in inspecting stainless steel pressure vessels.